elitefts™ Aggressive Power Bar

elitefts™ Aggressive Power Bar

 

NOTE: We brought this bar back due to several customer requests.  We discontinued this bar due to the number of returns regarding the bar knurling being too aggressive. We will NOT be issuing returns or credit due to the aggressive knurling of this bar. 

We’re pretty sure we went overboard on the SUPER Aggressive Knurling…

  • Made in the USA
  • Rust-proof!
  • Extended sleeve length for a greater load
  • 45-pound bar 
  • Great bar for all lifts
  • 86.5" total length of bar
  • 16.5" Loadable Weight Space
  • 190K Tensile Strength
  • 28.5mm Diameter
  • 2000 LB weight capacity

     

Typically ships in 2-3 business days.

$448.50
SKU
DSBB-AGGRESSIVEPB
Rating:
100 % of 100

elitefts power bar specifications chart

elitefts™ Aggressive Power Bar

A great bar for the squat, bench, and deadlift, this bar is a must-have for your home setup and gym. Limited in space? Choose the elitefts™ Power Bar.

power bar picture collage showing lifter using bar

Bar Features

  • Aggressive Knurling with Center Knurl and Powerlifting Marks: Knurling on the elitefts™ Power Bar is much more aggressive to help the lifter grip the bar during heavier attempts. Compared an Olympic bar, the elitefts™ Power Bar's knurling comes in more to accommodate a narrow grip, as well as center knurling for a more secure bar placement in squats, good mornings, or lunges.
  • Bronze Bushing Bar: The barbell bearings fit between the bar and the sleeve to reduce the friction between the outer and inner sleeves, making the spinning movement smoother.
  • 1-inch (2.85 cm) Diameter with 16.375-inch (41.5 cm) Sleeves: The diameter is pretty typical with the exception of our extreme knurling. Our sleeves, however, have an extended length for a greater load as well as placing the load set closer to the user's hands. The closer the load sits to the user's hand placement means the deflection of the bar will be less than a typical bar with less load area.
  • 2,000 Pound (907 kg) Capacity with 190,000 PSI Strength: PSI measures the tensile strength of the bar, which means the amount of force needed to permanently damage it. A bar with a low PSI will bend easily, and it will be no good after a few drops or one bad one.
  • Zinc Plating: Having high-quality zinc plating on our bar prevents it from rusting. It does not prevent scratches, dents, or nicks. If your bar does not have any scratches, dents, or nicks, you are not using it properly. 

 

Write Your Own Review
You're reviewing:elitefts™ Aggressive Power Bar
Your Rating